Steel Rear Bumper and Tire Carrier for Jeep JK Under Cover Fabworks

The UCF Steel Rear Bumper and Tire Carrier for Jeep JK is a great option for those that want more protection than some other companies offer.

This bumper is the full width of the Jeep and actually protrudes from the sides be a couple inches to protect your sheet metal. It extends forward to the rear of the back fender wells. The combined weight of the bumper and tire carrier is about 125 lbs.

We were able to keep the weight to a minimum with intelligent material selections. The frame mounting system is made from 1/4 inch and 3/8 inch carbon steel plate. The d-ring mounts are 3/4 inch thick and welded to the 3/8 inch mounting plates.

The bumper body is made from 3/16 inch carbon steel plate. We used large radius tooling to make all the bends on the bumper body for added strength and style.

The tire carrier is fabricated from 3/16 inch steel. It pivots on HD trailer bearings and is attached to the rear door with a double pivot. This allows the door/tire carrier to be opened with one hand in one smooth motion.

When the tire carrier is closed it rests against the rear door via a rubber bushing that tensions the system sufficiently so that no rattles or vibrations are experienced.

The tire carrier is adaptable to many different available wheels, from stock 6 inch backspacing down to 3.5 inch. It will handle tires as large as 37 inch.
Details:

• Steel Rear Bumper and Tire Carrier for Jeep JK
• Frame mounting system is made from 1/4 inch and 3/8 inch carbon steel plate
• D-ring mounts are 3/4 inch thick and welded to the 3/8 inch mounting plates
• Tire carrier is fabricated from 3/16 inch steel
• Sold As: Each
• Fits: 2007-2018 Jeep Wrangler JK