Adjustable Panhard Mount For Axle Artec Industries

Adjustable Frame Panhard Mount. This panhard mount is For use with any 3-link or 4-link scenario. Designed For joints that have either a 1.75 inch mounting width such as 3/4 inch and 7/8 inch x 3/4 inch rod ends with high misalignment spacers or those with a 2.625 inch mounting width such as bushings and cartridge joints.
Details:

• Sold as Each
• Orientation: Centered on Tube
• It offer three holes at 2, 3.25, and 4.5 inches drop from frame to allow you to fine tune your suspension.
• Offered Inch either an outside the frame orientation or inside the frame.
• May require a small amount of trimming if other brackets interfere.